Testing page for app

The French operator plans to drill the first exploration well on an onshore tract during 2023.

In 2022, several events took place that required a pause to think about their effect on our Society. It is time to close the chapter on these events, recognizing the lessons learned from them, and move forward with the main activities of SPE to provide members with the technical and professional support that allows us to provide the world with the energy it needs.

The authors of this paper describe a study of magnesian calcite particles forming hard, inhibitor-resistant calcium-carbonate-like deposits and potential mitigation measures.

US GOM players have come out of the pandemic slowdown with new perspectives on spending and cycle times and are targeting finds that can utilize existing hardware instead of those that require new iron.

This paper describes a high-density high-pressure/high-temperature brine-based drilling fluid that provides long-term stability and solids-suspension properties for extended periods of time.

The next drilling target will look for reserves in three different plays in Louisiana.

A consortium of 20 organizations, REX-CO2, including research institutions, operators, and regulatory authorities, studied mature wells in two areas of the UK Continental Shelf. Subsurface data were evaluated and verified the wells’ potential suitability for both reuse and CO2 injection and storage.

Hydraulic fracture stimulation is proven to be the economic way to develop tight unconventional reservoirs. From an operational perspective, hydraulic stimulation is well established and widely applied to most unconventional plays. There is still room for improvement, however, to increase the efficiency and deepen the understanding of the detailed mechanism in the pro…

Petrobras will continue to operate the assets following the selldown of working interest.

Understanding the injected-water preferential paths is a key aspect of waterflood optimization in reservoirs characterized by strong vertical and areal heterogeneities. Devising specific work flows for such applications is important.