Search results for:

Semisubmersible floating production systems (SFPSs) with steel catenary risers (SCRs) are attractive field-development solutions, especially in deeper water of Western Australia. However, SCR design is challenging in the offshore Western Australia environment because of severe cyclonic environments.

The full-field development plan for the Khazzan project in Oman is based on drilling approximately 300 wells targeting gas-producing horizons at measured depths of approximately 6000 m with 1000 m horizontal sections.

Although the use of managed-pressure drilling is helping drilling operation by allowing better pressure control in the annulus, there are also new risks to be taken into consideration.

Pressurized-mud-cap drilling (PMCD) and early kick detection (EKD) are two unconventional drilling techniques that have been used widely individually, mostly in relation to closed and pressurizable systems and to managed-pressure-drilling (MPD) applications.

Smart waterflooding by tuning injection-water salinity and ionic composition has gained attention in recent years. In this study, desalination technologies are reviewed with the objective to develop potential water-treatment solutions that can most efficiently alter injection-water chemistry.

This paper focuses on a numerical-modeling analysis of the acid-gas-injection (AGI) scenario in carbonate HP/HT reservoirs, and presents the way in which AGI impacts asphaltene-precipitation behavior.

DuPont is ramping up the commercial-scale implementation of its microbial enhanced oil recovery (MEOR) method after nearly a decade of development and testing of what it says is a low-risk way to improve production from mature fields.

After a year of field testing, a new type of biopolymer developed by Wintershall, Germany’s largest oil and gas producer, is showing promise as an effective enhanced oil recovery (EOR) tool in one of the country’s longest producing oil fields.

The development and production of oil and gas resources supported by more-available continuous real-time data sources entail incessant learning and knowledge search over a relatively long period of time.

Standalone-sand-screen (SAS) completion, especially in horizontal gas wells with high potential for sand production, typically suffers from premature failure caused by sand erosion resulting from high velocity in the annulus near the heel section.