Drilling/completion fluids
This paper presents the application of degradable particulate-diverter technology to improve oil production by effectively diverting stimulation treatment fluids away from high-water-cut, high-permeability, high-temperature producing intervals or zones.
This paper presents the methodology for developing drill-in organophilic clay-free invert-emulsion-fluid technology that enhances well production through fundamental geological studies and fluid testing.
This paper presents the large-scale deployment and operational integration of an advanced, automated rheometer in the Ghawar gas field, one of the world’s most prolific and technically complex hydrocarbon developments.
-
For nanotechnology-based drilling fluids, acceptance means proving they can outperform other drilling fluids. Initial results have been encouraging enough to move toward commercialization. -
With shrinking budgets and limited resources, partnerships and collaboration are considered the best options. It is no secret that universities and industry have a special platform to work hand-in-hand.
-
The wireline formation tester (WFT) is a well-developed technology used to collect representative downhole fluid samples. The authors introduce a simple but effective method for monitoring WFT sampling when targeting the low levels of contamination needed for asphaltene-onset-pressure analysis.
-
This work focuses on the laboratory techniques for developing, assessing, and analyzing innovative water-based drilling fluids containing iron oxide (Fe2O3) and silica (SiO2) nanoparticles.
-
At certain conditions, the good performance of synthetic-based mud (SBM) will degrade, particularly because of the effect of chemical instability under high temperature. Silicon dioxide (SiO2) nanopowder (nanosilica) holds the potential for performance improvement.
-
A long-time energy industry executive and chemical engineer has built a new water treatment system that he says can increase recovery rates from shale wells without using chemicals and will recycle all the water used in the process.
-
A challenge in many permeable, water-sensitive, subhydrostatic reservoirs is avoiding the loss of completion fluid when completing or working over wells.
-
The inventor of a new water-based drilling fluid believes the chemical process involved with his technology opens up natural fractures as drilling takes place to increase production in shale formations.
-
Despite hostile wellbore conditions, an operations team overcame challenges of drilling-fluid design and management to drill the first ultrahigh-pressure/high-temperature (HP/HT), deep-gas well offshore Malay Peninsula.
-
In an effort to optimize drilling operations and economics, an operator examined the effect of adding hollow glass spheres (HGSs) directly to the drilling fluid instead of performing underbalanced drilling.
