Fracturing/pressure pumping
This paper focuses on a replicable, quantitative workflow using completions-process simulation software.
This paper presents a high-fidelity, reservoir-centric stimulation-to-production modeling workflow to prevent fracture-driven interactions.
This work elaborates on recommended practices for calibrating a numerical model to a set of available infill-well field observations.
-
Sourcing water for large multifracture stimulations in west Texas is a well-known constraint on oil and gas activities in the area. A 6-month pilot operation demonstrated that produced-water reuse is technically feasible and can be a cost-effective solution. -
This paper summarizes the benefits of using a bipolymer crosslinking system in environments where water quality cannot be guaranteed. It also demonstrates the yielded cost savings per well that are achievable when reusing 100% produced or flowback water for hydraulic fracturing.
-
Use of a complex-nanofluids (CNF) additive to hydraulic fracturing fluids has doubled even as activity has fallen because of potential production increases.
-
Dubai Petroleum embarked on a new mission last year to drill and complete its first multistage, hydraulically fractured, and propped horizontal well from an offshore platform.
-
Saudi Aramco has begun moving toward the production phase of its ambitious plan to develop its enormous hoard of unconventional gas resources.
-
In organic shales, hydraulic fracturing is important for optimizing the production of horizontal wells. For a standalone lateral, the propped surface should be maximized to increase production. In the case of a pad, well spacing is an additional factor.
-
On the basis of production data, diagnostic methods, and field observations, it is becoming increasingly clear that induced unpropped fractures created during the hydraulic-fracturing operation play a critical role in determining the success of fracture treatments.
-
This paper offers an alternative explanation for the early boundary-dominated flow related to dissolution of salt-sealed natural fractures in the shale.
-
One study is showing that when pumping a proppant into a fracture, a little bit of extra effort might increase performance.
-
A long-time energy industry executive and chemical engineer has built a new water treatment system that he says can increase recovery rates from shale wells without using chemicals and will recycle all the water used in the process.
