Testing page for app

Ted Frankiewicz' Distinguished Lecture presentation on “Diagnosing and Resolving Chemical and Mechanical Problems in Produced Water Treating Systems” was the subject of a recent webinar.

At the end of the day, when you are working with heavy oil, the question is how to design your system, including both the layout and the functional aspects of various equipment.

Operators’ demands for structural designs are changing along with the need to produce from harsher environments, deeper waters, remote areas, and marginal fields. New-builds and modifications require different approaches in assessment of cost, design, and construction.

There is little doubt that the industry is committed to improving its safety performance—and most agree that improving the collective culture around safety is an effective approach to achieving this goal. But the specifics of how to achieve lasting change are more difficult.

This paper shows that viscosity has a significant influence on gas transient flow in pipe- and tank-leakage evaluation. This led to the development of a methodology for more reliable evaluation of gas transient flow.

A realistic computational fluid dynamics (CFD) simulation of a field three-phase separator has been developed. Further, a useful approach to estimating the particle size distribution in oilfield separators was developed. The predicted separation efficiencies are consistent with oilfield experience.

SPE has formed a new technical section focusing on human factors engineering, which seeks to bring in knowledge from other industries, thereby ensuring safe operations and fostering a coordinated safety culture from top-level executives to workers on the ground.

A recent webinar discussed current technologies to enable reuse of produced water in gas and oil shale developments.

ATCE included expanded content for project, facilities and construction professionals. Panels discussed our performance in managing megaprojects and our challenges in designing separation equipment. Two technical paper sessions were also included.

Fluid flows in separation vessels are key to effective performance. The flow distributions are affected by the vessel, the configuration of its internals, and the layout of the upstream piping connecting to the vessel’s inlet nozzle.