Testing page for app

Industry's finest minds are expected to come together for an idea summit during the upcoming SPE Intelligent Energy International Conference and Exhibition in Aberdeen.

This paper presents experimental and field-case studies with a sandstone-acidizing treatment designed to retard the hydrofluoric acid reaction rate and enable single-stage treatment.

This paper studied three residual-free fluid systems for acid treatments and fracturing in order to develop no-damage or reduced-damage and highly effective stimulation techniques for long-interval wells.

A 2-year comprehensive effort to design, test, manufacture, and deploy a new high-pressure completion tubular for Chevron’s deepwater Gulf of Mexico (GOM) operations is presented.

A real-time method is presented to predict impending stuck pipe with sufficient warning to prevent it. The new method uses automated analysis of real-time modeling coupled with real-time-data analysis.

This paper describes a gas-injection pilot that has been implemented in offshore Middle East carbonate reservoirs to assess injectivity, productivity, macroscopic-sweep efficiency, flow assurance, and operational efficiency in a field that has a long water-injection history.

The operator has initiated a cyclic-steam-stimulation project in the Opal A diatomite of the Sisquoc formation on the Careaga lease in the Orcutt oil field in Santa Barbara County, California. This paper discusses steam-injection step-rate tests (SRTs) for this asset as part of its expansion.

The polymer-injection project in the Dalia field, one of the main fields of Block 17 in deepwater Angola, represents a world first for both surface and subsurface aspects.

The Loma Alta Sur (LAS) field is a multilayer fluvial sandstone reservoir in the Neuquén basin of Argentina. Colloidal-dispersion-gel injection was considered a viable strategy to improve oil recovery in the field after early water breakthrough.

Challenging environments such as unstable clay formations represent high operational risk when running tubulars after drilling is completed.