Testing page for app

Three-dimensional reservoir models are best created with a combination of well logs and 3D-seismic data. However, the effective integration of these results is not easy because of limited seismic resolution.

The paper discusses an approach for predicting the lateral variation of net to gross (NTG) by use of 3D probabilistic seismic inversion.

The objective of this study is to validate the concept of using a seismically derived discrete fracture network (DFN) calibrated with borehole measurements, for complex-hydraulic-fracture modeling.

Cairn Energy appointed Eric Hathon as its director of exploration. Hathon joins Cairn from Marathon Oil, where he was director of conventional exploration. He joined Marathon in 1991 as an exploration geologist, and since then he has worked in several senior international management roles in North America, South America, Europe, the Middle East, and Africa.

Tan Ek Kia will take over as chairman of the board of directors of KrisEnergy. Tan joined the company’s board as a nonexecutive independent director in January 2013 and has more than 40 years’ experience in the oil and gas industry. He joined Shell in 1973 and worked in various positions in the company’s upstream oil and gas and petrochemical businesses, including a s…

Woodside named Richard Goyder as chairman of its board of directors, effective at the close of the company’s Annual General Meeting in April 2018. Goyder currently serves as the chief executive officer (CEO) at Wesfarmers; he will leave the company in November. He has worked for Wesfarmers since 1993 and was appointed to his current position in 2005.

A look at techniques and technologies aimed at mitigating erosion issues from produced sand.

In the midst of enormous change, OTC retains its status as a “must attend” technical conference for petroleum engineers and scientists working around the globe.

The Dakota Access Pipeline is 99% completed and expected to begin flowing oil in March or April. Check out the 3D model of a drilling pad at the site generated from drone imagery.

Always recorded but almost never used, the water hammer signal could offer completions engineers another set of insightful data if petroleum engineers can crack its code.