JPT Site Search

Search results for:

12,857 results12,857 results

Sort by

Full Pressure Coupling for Geomechanical Multiphase Multicomponent Flow Simulation

Simulation of coupled flow and geomechanics is of rising importance as unconventional subsurface exploration pushes the operational envelope of geological media.

Locked
June 30, 2015 • Journal of Petroleum Technology
A Fully Coupled Network Model: Comparison With Other Integrated Models on Field Cases

There has been increasing interest in integrated simulation of reservoirs, wells, and surface facilities, which is particularly important for companies with major assets in deep offshore fields.

Locked
June 30, 2015 • Journal of Petroleum Technology
Offshore/subsea systems

Selection of Subsea-Production Systems for Field Development in Arctic Environments

In this paper, an analysis of the selection of integrated template structures (ITSs) for Arctic environments is presented.

Locked
July 31, 2015 • Journal of Petroleum Technology
Offshore/subsea systems

Lucius Subsea-Production-System Design and Installation

This paper describes the architecture of the Lucius Gulf of Mexico subsea production system and the drivers behind it.

Locked
July 31, 2015 • Journal of Petroleum Technology
Offshore/subsea systems

A Global Subsea-Hardware-Standardization Program Applied Offshore Brazil

This paper addresses the standardized features applied to the 10,000-psi-rated subsea-system components at the Espirito Santos FPSO in the Campos basin offshore Brazil.

Locked
July 31, 2015 • Journal of Petroleum Technology
Constraining Reservoir Models by Integrating Data Across Disciplines

Field X in the North Sea was discovered in the 1980s, and large subsurface uncertainties exist regarding reservoir extent, fluid contacts, and reservoir properties.

Locked
June 30, 2015 • Journal of Petroleum Technology
Offshore/subsea systems

Subsea Technology-2015

The need for standardization of subsea equipment has never been greater. With the drop in oil prices, cost reduction has become critical.

July 31, 2015 • Tom Kelly • Journal of Petroleum Technology
Rapid Reservoir Modeling: Prototyping With an Intuitive, Sketch-Based Interface

Constructing and refining complex reservoir models are challenging and time-consuming tasks that entail a high degree of uncertainty.

Locked
June 30, 2015 • Journal of Petroleum Technology
Artificial lift

Gas Lift Nodal-Analysis Model Provides Economical Approach to Optimization

Field X consists of 17 scattered clusters of more than 100 oil wells producing from different reservoirs.

Locked
June 30, 2015 • Journal of Petroleum Technology
Artificial lift

Reliability Improvement in Beam Pumps by Use of a Unique Methodology

This paper focuses on analysis of beam-pump-failure root causes and trends and how the operator has used these data combined with automated equipment to reduce failure frequency and operating cost.

Locked
June 30, 2015 • Journal of Petroleum Technology

Page 53 of 1,286