Search results for:

This paper presents the results of a comprehensive multiphase-flow study that investigated the relationship between the principal stresses and lateral direction in hydraulically fractured horizontal wells.

This paper describes how the use of production-modeling tools, coupled with field pressure/temperature-data-acquisition systems and programming software, served as a means to improve production allocation and surveillance on a real-time basis in the Greater Angostura Field.

The authors used a high-quality digital-log data set to characterize reservoir quality accurately in the Niobrara and Codell Formations in the Denver-Julesberg (DJ) Basin.

A new tool enables variable bore rams and shear rams to be tested in one run, cutting rig time significantly.

The A East Haradh formation contains a 200-m-thick oil column of highly viscous oil, with viscosity ranging from 200 to 400,000 cp.

The most popular technology for producing heavy oil (HO) and bitumen is reservoir heating, mainly by steam injection.

This paper presents an investigation into the effect of catalytic nanoparticles on the efficiency of recovery from continuous steam injection.

This paper explores the applications, benefits, and value of a high-build-rate rotary-steerable system (HRSS) capable of delivering dogleg severity (DLS) greater than 18°/100 ft.

Drillstring vibration is a leading cause of downhole-tool failure and premature wear of downhole equipment.

Sourcing water for large multifracture stimulations in west Texas is a well-known constraint on oil and gas activities in the area. A 6-month pilot operation demonstrated that produced-water reuse is technically feasible and can be a cost-effective solution.