Completions
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
This paper introduces in-pipe inspection technologies enabling high-resolution digital measurements of tubular internal diameter and wall thickness for critical downhole applications.
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
-
AFGlobal acquired the Axon pressure pump technology and product line from Amkin Technologies, a privately held oilfield equipment and technology developer. -
This paper shows results from use of a new technology that uses in-well-conveyed fiber-optic distributed acoustic sensing (DAS) for the detection of sand-ingress zones across the reservoir section throughout the production period in real time.
-
This paper summarizes a technology using SMP to provide downhole sand control in openhole environments.
-
Production from sand-prone reservoirs is one of the more daunting tasks, with formidable challenges. Sand management and control remain as an old problem but with new challenges because of the suppressed oil and gas prices. Cost-saving and value-adding solutions are vital now more than ever.
-
This paper provides perspective on the current state of multizone completion technology and issues encountered in the industry with developing a system that offers increased capabilities to meet the increasing challenges presented by the Lower Tertiary in the Gulf of Mexico.
-
A Canadian startup company is developing a tool that uses solid rocket fuel to fracture vertical and horizontal wells without the use of water.
-
To reduce the risk of wells getting “frac hits,” Permian Basin operators around Midland created an information exchange to give them notice of nearby fracturing.
-
The boom in organic shale plays has revealed the critical need to size hydraulic-facture treatments correctly to achieve commercial success.
-
A Gulf of Mexico case history is presented describing the successful delivery of two deep high-pressure high-rate-designed oil wells in an ultradeepwater environment.
-
A new line of specialized polycrystalline-diamond-compact bits have been tested in a series of Bakken wells. The bits’ integrated design allowed significant increases in drilling rate and the number of plugs drilled.
