Drilling
As Egypt’s largest oil and gas investor, Eni is ramping up its 2026–2027 drilling campaign with new investments cross the Mediterranean offshore, Nile Delta, Western Desert, and offshore Sinai to strengthen the country’s role as a regional gas and LNG export hub.
The deals, with a potential value exceeding $3.7 billion, are aimed at strengthening Saudi Aramco’s supply chains and expanding its use of industrial artificial intelligence.
Brownfield redevelopment and new exploration projects could lift Venezuelan output above 2 million B/D by next decade.
-
Despite cement’s remarkable properties, the search continues for enhancements in the areas of cost and isolation performance. Efficiencies and enhancements have been explored even to the point of replacing cement with other materials. -
Aggressive drilling growth in the Permian and other shale plays belies the cost of those wells, which in many cases are in the red.
-
Deepwater operators continually face technical and environmental challenges to drilling and completing wells safely and efficiently.
-
This paper focuses on the application of radio-frequency-identification technology to enable an operator to eliminate an intervention run (or intermediate liner) for a 10,000-ft reservoir section.
-
One common issue among operators in determining whether to install a managed-pressure-drilling (MPD) system for a campaign is the significant upfront cost.
-
Pore-pressure prediction plays an important role in well planning as exploration targets shift to deeper, overpressured reservoirs.
-
The industry has developed a deep and healthy respect for systems-engineering processes and the associated full considerations during the deployment of new technologies. The result has been a significant improvement in the successful use and broader deployment of these attractive technologies.
-
The session will cover an area of growing interest, given increasing concern about wellbore integrity and well control.
-
Recent studies have found that the viscosities of borate gels at actual downhole pressure conditions may be 80% less than those from standard high-pressure/high-temperature rheometer measurement (which uses 400-psi top pressure).
-
This paper examines the chemistry of developing seawater-based fracturing fluids using two types of polymers as gelling agents and compares results to existing fresh-water-based-fracturing-fluid data under different conditions.
