Drilling
The company said that its AD-300, a 50-m-high automated island drilling rig that walks between wells, was delivered 3 months ahead of schedule.
A report commissioned by Havtil, the Norwegian Ocean Industry Authority, calls for better dialogue regarding pore-pressure uncertainty and higher-end drilling techniques like managed pressure drilling as methods to reduce the risk of well-control events.
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
-
This paper focuses on the application of radio-frequency-identification technology to enable an operator to eliminate an intervention run (or intermediate liner) for a 10,000-ft reservoir section. -
One common issue among operators in determining whether to install a managed-pressure-drilling (MPD) system for a campaign is the significant upfront cost.
-
Pore-pressure prediction plays an important role in well planning as exploration targets shift to deeper, overpressured reservoirs.
-
The session will cover an area of growing interest, given increasing concern about wellbore integrity and well control.
-
This paper examines the chemistry of developing seawater-based fracturing fluids using two types of polymers as gelling agents and compares results to existing fresh-water-based-fracturing-fluid data under different conditions.
-
Recent studies have found that the viscosities of borate gels at actual downhole pressure conditions may be 80% less than those from standard high-pressure/high-temperature rheometer measurement (which uses 400-psi top pressure).
-
In the midst of enormous change, OTC retains its status as a “must attend” technical conference for petroleum engineers and scientists working around the globe.
-
Always recorded but almost never used, the water hammer signal could offer completions engineers another set of insightful data if petroleum engineers can crack its code.
-
As drilling activity rises, the demand for all that is needed to complete wells rises even faster. The wells are bigger, and more water and sand are used for each foot stimulated.
-
This paper focuses on cementing-design challenges and discusses the engineering techniques used to approach them.
