Production
This paper aims to establish a set of best practices for generating particle-size-distribution data from core samples.
Unlike traditional AI approaches that rely primarily on historical data, physics-based AI integrates physical laws, engineering expertise, and operational constraints directly into the learning process. Three recent SPE papers illustrate how this paradigm is transforming the industry through intelligent condition monitoring, virtual sensing, and autonomous production …
This research focuses on combining physics-based expert rules with machine learning to improve the detection of failure-related events in electrical submersible pumps.
-
As part of a project that involves the use of four artificial islands to drill and complete more than 300 extended-reach-drilling (ERD) wells in a giant offshore oil field, several completion designs have been piloted for brownfield development. -
Although refracturing is a topic that has gained a lot of interest, many shale producers have been sitting on the sidelines because early results did not justify the spending
-
Chemical sand consolidation works by pumping chemicals downhole to strengthen the formation and stop sanding. In most cases reported in the industry, chemical consolidation has been used in short production intervals (less than 100 m).
-
Production engineers are often asked to manage both the artificial lift (AL) system and the upstream chemical injection program for a project.
-
A panel of experts says US shale producers need to rethink their drilling and completion designs as problems mount for horizontal wells when they go on pump. Hanging in the balance is whether long-term production from many shale wells will be achievable.
-
Rigless coiled-tubing-unit (CTU) interventions can be effective in returning to production wells that have lost electrical-submersible-pump (ESP) efficiency because of organic, inorganic, or mixed scale deposits.
-
Calcium sulfate (CaSO4) in the form of gypsum and anhydrite is one of the more prevalent evaporite minerals typically found in the carbonate rocks of the western Canadian sedimentary basin (WCSB).
-
The removal of mineral scale in the oil field is typically perceived as a somewhat nonscientific discipline.
-
Sour gas is being produced from a number of carbon-steel-completed wells in the US, Canada, France, and Saudi Arabia.
-
This work introduces sodium gluconate as an efficient and environmentally friendly iron-chelating agent.
