Reservoir
Coreflood experiments reveal that alkali significantly reduces viscosity loss in polyacrylamide flooding systems by minimizing adsorption and improving polymer stability under shear stress. The findings position viscosity retention as a key screening criterion for successful alkali-polymer enhanced-oil-recovery applications.
This SPE technical section editorial synthesizes six technical themes shaping CO2 transport and storage and interprets them through a petroleum engineering capability lens.
The UAE project is expected to produce up to 345 MMscf/D by 2029, with expansion potential to 1 Bcf/D.
-
The evaluation of complex carbonate reservoirs is a challenging task, and a detailed understanding of reservoir heterogeneity is still lacking. In this study, the effect of static rock type and sample size was investigated on special-core-analysis laboratory (SCAL) data derived from capillary pressure and resistivity-index experiments at reservoir temperature and net …
-
Accurate determination of relative permeability hysteresis is needed to predict water-alternating-gas (WAG) injection reliably. Two series of gas/water relative permeability hysteresis curves were obtained from corefloods under mixed-wet conditions. The results revealed that none of the widely used hysteresis models (e.g., Carlson and Killough models) is able to predi…
-
Drillstem testing of low-permeability reservoirs is challenging because high-pressure drawdown around the wellbore lowers fluids below saturation pressure and creates two-phase flow into the wellbore. The fluids produced at surface no longer represent the original reservoir fluid. This paper shows the benefits of a careful methodology of data selection and equation-of…
-
The variable data quality of core analysis, the sensitivity of results to different test methods, poor reporting standards, and the reluctance of some vendors to share experience and expertise have contributed to basic mistakes and poor data quality.
-
In this second article of a series covering water management in hydraulic fracturing (HF) in unconventional resources, the properties and characteristics of the flowback fluids are discussed, together with the general categories of technologies that are best suited to treat them.
-
Exploration wells, unconventional plays, and development wells can benefit from NeoScope, a sourceless formation evaluation-while-drilling solution. Two case studies share how the technology mitigates the risks or logistic complications associated with chemical nuclear sources.
-
Looking back through previous editions of this article, I note that, in 2011, I wrote, “there’s a growing tendency in some quarters to use very simple models.” That may be true, but there is also a growing tendency among vendors to offer models with more and more features.
-
Large volumes of gas can be produced at high rates with conventional horizontal- or vertical-well configurations for long periods of time from some methane-hydrate accumulations by means of depressurization-induced dissociation.
-
Initializing a reservoir simulator requires populating a 3D dynamic-grid-cell model with subsurface data and fit-for-purpose interrelational algorithms. In practice, these prerequisites rarely are satisfied fully.
-
Recent industry activities have turned their focus to the areas of liquid-rich shale (LRS) and light tight oil (LTO) along with unconventional tight and shale gas.