Reservoir
The UAE project is expected to produce up to 345 MMscf/D by 2029, with expansion potential to 1 Bcf/D.
This study investigates the potential for in-situ hydrogen generation from hydrocarbons using in-situ combustion, with particular emphasis on the role of kerogen content and heating mode.
This paper presents the application of degradable particulate-diverter technology to improve oil production by effectively diverting stimulation treatment fluids away from high-water-cut, high-permeability, high-temperature producing intervals or zones.
-
Drillstem testing of low-permeability reservoirs is challenging because high-pressure drawdown around the wellbore lowers fluids below saturation pressure and creates two-phase flow into the wellbore. The fluids produced at surface no longer represent the original reservoir fluid. This paper shows the benefits of a careful methodology of data selection and equation-of… -
The variable data quality of core analysis, the sensitivity of results to different test methods, poor reporting standards, and the reluctance of some vendors to share experience and expertise have contributed to basic mistakes and poor data quality.
-
In this second article of a series covering water management in hydraulic fracturing (HF) in unconventional resources, the properties and characteristics of the flowback fluids are discussed, together with the general categories of technologies that are best suited to treat them.
-
Exploration wells, unconventional plays, and development wells can benefit from NeoScope, a sourceless formation evaluation-while-drilling solution. Two case studies share how the technology mitigates the risks or logistic complications associated with chemical nuclear sources.
-
This paper presents a pragmatic approach to frame, evaluate, and compare appraisal strategies in resource plays.
-
The M4-field reservoir is approximately 2000 m below sea level in a water depth of approximately 120 m. A carbon dioxide (CO2) geological-storage study was carried out to determine the feasibility of injecting and storing CO2 in the depleted M4 carbonate gas reservoir.
-
Looking back through previous editions of this article, I note that, in 2011, I wrote, “there’s a growing tendency in some quarters to use very simple models.” That may be true, but there is also a growing tendency among vendors to offer models with more and more features.
-
Large volumes of gas can be produced at high rates with conventional horizontal- or vertical-well configurations for long periods of time from some methane-hydrate accumulations by means of depressurization-induced dissociation.
-
Initializing a reservoir simulator requires populating a 3D dynamic-grid-cell model with subsurface data and fit-for-purpose interrelational algorithms. In practice, these prerequisites rarely are satisfied fully.
-
Recent industry activities have turned their focus to the areas of liquid-rich shale (LRS) and light tight oil (LTO) along with unconventional tight and shale gas.
