Reservoir
This study demonstrates how routinely acquired downhole temperature data allows for direct estimation of fluid saturations and delivers more accurate reservoir volume assessments, particularly in aquifer-supported systems.
Sponsored
Effective data analysis depends on seeing connections that matter. Explore how Spotfire enables a more intuitive approach to understanding petroleum data.
The deal adds over 1,000 potential drilling locations and almost doubles oil production for Houston-based Magnolia.
-
The variable data quality of core analysis, the sensitivity of results to different test methods, poor reporting standards, and the reluctance of some vendors to share experience and expertise have contributed to basic mistakes and poor data quality. -
In this second article of a series covering water management in hydraulic fracturing (HF) in unconventional resources, the properties and characteristics of the flowback fluids are discussed, together with the general categories of technologies that are best suited to treat them.
-
Exploration wells, unconventional plays, and development wells can benefit from NeoScope, a sourceless formation evaluation-while-drilling solution. Two case studies share how the technology mitigates the risks or logistic complications associated with chemical nuclear sources.
-
Initializing a reservoir simulator requires populating a 3D dynamic-grid-cell model with subsurface data and fit-for-purpose interrelational algorithms. In practice, these prerequisites rarely are satisfied fully.
-
Recent industry activities have turned their focus to the areas of liquid-rich shale (LRS) and light tight oil (LTO) along with unconventional tight and shale gas.
-
Unconventional gas is poised to enter its Golden Age and to effect positive global change if it can meet three challenges. Consider the 7 billion people on Earth who use energy each day.
-
Looking back through previous editions of this article, I note that, in 2011, I wrote, “there’s a growing tendency in some quarters to use very simple models.” That may be true, but there is also a growing tendency among vendors to offer models with more and more features.
-
Large volumes of gas can be produced at high rates with conventional horizontal- or vertical-well configurations for long periods of time from some methane-hydrate accumulations by means of depressurization-induced dissociation.
-
Many different completion techniques, such as vertical-well multiseam completions and multiple lateral wellbores drilled into a single coal seam, have been used to develop coalbed methane (CBM) reservoirs.
-
This paper presents a pragmatic approach to frame, evaluate, and compare appraisal strategies in resource plays.
