Casing/cementing/zonal isolation

Deepwater Tieback-Cementing-Design Challenges and Engineering Approach

This paper focuses on cementing-design challenges and discusses the engineering techniques used to approach them.

jpt-2017-02-dttieback-f1.jpg
Fig. 1—(a) Original predrill casing design. (b) Altered casing design with additional 11⅞-in. scab liner. MD=measured depth.

The conventional design configuration of nested liners does not always allow for meeting the Bureau of Ocean Energy Management, Regulation, and Enforcement’s worst-case-discharge (WCD) criteria, and the long-string configuration presents operational limitations. Tieback casings and liners, on the other hand, enable reaching the well objective while meeting the WCD criteria. However, tieback casings and liners present several operational challenges during the well-construction phase. This paper focuses on cementing-design challenges and discusses the engineering techniques used to approach them.

Well-Construction Design Changes

To meet WCD criteria, existing well-­construction designs for the deepwater Gulf of Mexico must be modified significantly.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.