Testing page for app
-
After 70 years of production, more than 30% of the Arab C reservoir stock-tank original oil in place has been recovered through various mechanisms including natural depletion, waterflooding, gas lift implementation, and horizontal-well development.
-
This paper describes the first job in southeast Asia in developing horizontal-well placement in a turbidite environment.
-
The downturn and lack of investment for new projects are likely to impact the onshore pipeline industry toward the end of the decade. But the long-term drivers for pipeline construction, notably the increased demand for gas in regions such as Asia, remain stable.
-
This paper discusses the successful, fully integrated, 3D Earth modeling (EM) and dynamic reservoir simulation of the Hollin Formation in the Lago Agrio Field within an operator’s first producer field in Ecuador.
-
Though crude prices are rising, US shale producers face questions over whether their improving oil production results and cost efficiencies will last as increasing drilling activity drives demand for oilfield services.
-
High-concentration polymer flooding can improve oil-displacement efficiency but separation of oil/water mixture becomes more difficult because of emulsification. In this work, a case history of dehydration technology for HCPF production and lab investigation of emulsion behaviors are reviewed.
-
A study using a dynamic multiphase-flow software simulated a rapid-unloading event and determined the gas fraction in the riser annulus and the effect on riser fluid levels.
-
A look at the universities, startups, and multinational corporations in Silicon Valley, California, which are applying data science and predictive modeling for oilfield management.
-
A recently launched joint industry project (JIP) is working to improve petrophysical analysis methods to reduce the time and expense of characterizing tight sandstone gas reservoirs for exploration, appraisal, and production.
-
An influx-detection-at-pumps-stop (IDAPS) software was developed to provide early warning of abnormal flowback conditions during connections.