Latest News

Produced water from chemical floods can cause problems for separation and water treatment equipment due to the polymers and surfactants used. Challenges are greater offshore where space limitations can affect treatment options.

Efficient separation assumes uniform flow, but the reality of inlet geometries can invalidate this assumption, leading to separation problems and loss of separation efficiency.

As many platforms begin to produce beyond their design life, maintenance of mooring systems becomes more critical. With redundancies in place, operators may be unaware of initial failures, which can have major consequences if another failure occurs.

A webinar on scrubber design explains how to enhance separation efficiency by using an inline cyclonic separator as a pre-separator upstream of the scrubber.

A routine maintenance project became more complicated when an ROV inspection exposed unexpected trenching that reduced the holding capacity of the system.

Preferential engineering adds complexity and cost. The author's manifesto focuses on simple and elegant, combined with collaboration to meet future facilities needs.

A recent webinar discussed the challenges the industry faces in adapting automated systems and the steps that operators should take to tackle the challenges.

This paper presents a technique that results in an occupied structure being located properly and constructed to reduce the risk of harm to the occupants to a tolerable level.

Improving safety culture is an important goal that can improve, and eventually eliminate HSE incidents in oil and gas.

Floating LNG (FLNG) units have a higher risk of explosion than onshore plants because of the limited and congested environment on the ship. This paper focuses on proper design to address this hazard.

“Decision Making: What Makes a Decision Good,” was the topic of a recent webinar held by the SPE Human Factors Technical Section.

The focus of this paper is how efficiencies affect schedule, with the recognition of the secondary effect on project cost. This paper also proposes integrated project delivery to enhance effectiveness.