huff and puff

This paper presents a comprehensive model of geothermal exploitation for depleted deep heavy oil reservoirs through supercritical CO2 injection.

This paper presents a comprehensive literature review and critical examination of the published modeling and experimental studies regarding the recovery mechanisms of cyclic gas injection and the conditions under which the process can enhance oil recovery with the aim to identify lessons learned and areas in need of further study.

Injecting gas plus water proved more effective and less costly than gas-only injection in the Bakken.

The paper investigates estimation of optimal design variables that maximize net present value for life-cycle production optimization during a single-well CO2 huff ‘n’ puff process in unconventional oil reservoirs.

The paper presents a model for shale gas production in which CO2 is injected by huff ’n’ puff into a hydraulic fracture surrounded by a shale matrix.

The dynamic nature of unconventional-reservoir developments calls for the availability of fast and reliable history-matching methods for simulation models. In this paper, the authors apply an assisted-history-matching approach to a pair of wells in the Wolfcamp formation.

The objective of the study described in this paper was to investigate the feasibility of huff ‘n’ puff enhanced oil recovery (EOR) in a gas-condensate reservoir.

This paper studies the technical and economic viability of this EOR technique in Eagle Ford shale reservoirs using natural gas injection, generally after some period of primary depletion, typically through long, hydraulically fractured horizontal-reach wells.

The Eagle Ford formation has produced approximately 2 billion bbl of oil during the last 7 years, yet its potential may be even greater. Using improved oil-recovery (IOR) methods could result in billions of additional barrels of production.