Casing/cementing/zonal isolation
This study aims to systematically assess casing integrity and corrosion risks associated with CO2 injection in oil-recovery operations.
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
This paper presents a case study of oriented tubing-conveyed perforation followed by an acidizing operation to overcome technical challenges posed by a depleted reservoir targeted for a carbon capture, utilization, and storage project.
-
The authors describe a study in which leakage-rate modeling was performed to identify and evaluate the associated risks for designing a remedial action plan to safeguard a CO2 storage site. -
The authors write that polymeric additives are effective in the design of complex systems to house important chemical reagents under challenging conditions.
-
This paper examines current practices and developing trends in well construction and describes an alternative cementless approach to the discipline.
-
SponsoredBefore you pump materials down your well, be sure you fully understand the effectiveness of your friction reducers and gas migration slurries.
-
Offline cementing was used to develop a marginal field in Malaysia. The development was made possible through distinctive wellhead technology and good operational planning.
-
This paper describes the path to implementation of full casing rotation during primary cementing jobs.
-
This paper describes the path to implementation of full casing rotation during primary cementing jobs.
-
This year, in the presence of enormous challenges, the selected papers demonstrate step changes both in efficiency and in the results of cementing operations.
-
Shale producers have learned in recent years that their fracture plugs may not be holding up as well as they thought. One of the first operators to realize the true scope of the issue is now sharing the pathway it took to solving it.
-
The complete paper discusses a geophone array, including four, three-component geophones deployed by wireline, that provides a solution for this problem by creating a 3D map of the acoustic environment.
