Drilling
A report commissioned by Havtil, the Norwegian Ocean Industry Authority, calls for better dialogue regarding pore-pressure uncertainty and higher-end drilling techniques like managed pressure drilling as methods to reduce the risk of well-control events.
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
This paper presents findings reinforcing the argument that acid fracturing is a strong alternative stimulation method to improve productivity in the Austin Chalk formation.
-
Approximately one-half of all offshore conventional oil and gas resources are known or thought to be undrillable with conventional, open-to-atmosphere circulating fluids systems for safety, economic, and/or technical reasons. -
The Burgan reservoir consists of vertically stacked channel sands along with a fault network connected to the aquifer and contains highly viscous reservoir fluid.
-
The paper discusses two gas/condensate-development projects offshore Vietnam that deploy managed-pressure-drilling (MPD) technology.
-
Air drilling has become popular in the Marcellus and Utica shale reservoirs because of its higher rate of penetration (ROP) and less resulting formation damage.
-
An ongoing research project started nearly 3 years ago by the US Department of Energy’s National Energy Technology Laboratory (NETL) is shedding new light on what really happens to foamed cement as it is pumped deep down offshore wells during completions.
-
This is an update on several managed-pressure drilling (MPD) technologies and downhole drilling performance-enhancing tools in use onshore and is the first of a two-part series. The second article on offshore MPD technologies will appear in the February issue of JPT.
-
A scientist hired by federal regulators to look for ways to reduce the risk of well blowouts said it is time for the oil and gas industry to treat kicks taken while drilling the same way doctors treat heart attacks.
-
A 100% fully mechanical rotary-steerable tool has been developed specifically for the high-volume drilling market, providing full 3D directional control while under full rotation of the drillstring from surface.
-
The recent introduction of a new rolling-cutter polycrystalline-diamond-compact (PDC) bit that uses 360° of the diamond edge has delivered positive results in field trials.
-
Conventional drilling through lower intermediate intervals in the southern portion of the Alpine field on Alaska’s North Slope has posed significant challenges.
