Drilling
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
This guest editorial addresses the need for high-temperature directional drilling technologies as the number of rigs used to develop next-generation geothermal wells is set to rise in the coming years.
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
-
Uganda is on course to become the newest African oil exporter by 2025. -
The US onshore business is looking flat at the moment, though these sorts of predictions are prone to sudden shifts.
-
The US-based drilling contractor is buying the drilling technology company just three weeks after announcing a merger with NexTier Oilfield Solutions.
-
CNPC’s record-breaking 11,100-m exploration borehole in the Taklamakan Desert promises to unlock the science of producing oil and gas trapped in the world’s deepest reservoirs.
-
A flurry of activity has resulted in several long-term contract extensions.
-
The duo’s new services will be initially deployed in Iraq.
-
This paper presents a laboratory-based study that compares the three methods to measure static gel-strength development that are widely accepted in the industry.
-
The authors discuss a modified ultrasonic-cement-analyzer (UCA) vessel that allows assessment of slurry sealing performance under representative downhole conditions while running otherwise standard UCA equipment.
-
In 2022, the topics of the cementing and zonal isolation papers published were generally similar to those presented in previous years. A noticeable departure from previous years, however, was that many of the authors emphasized that their work would result in a reduction of greenhouse-gas emissions.
-
This paper compares the sealability performance of an expanding geopolymer with that of an expansive commercial cement in terms of the shear bond strength and the hydraulic bond strength at curing conditions of 25℃ and 34.5 bar.
