Drilling
As Egypt’s largest oil and gas investor, Eni is ramping up its 2026–2027 drilling campaign with new investments cross the Mediterranean offshore, Nile Delta, Western Desert, and offshore Sinai to strengthen the country’s role as a regional gas and LNG export hub.
The deals, with a potential value exceeding $3.7 billion, are aimed at strengthening Saudi Aramco’s supply chains and expanding its use of industrial artificial intelligence.
Brownfield redevelopment and new exploration projects could lift Venezuelan output above 2 million B/D by next decade.
-
The development of multilateral wells and long-reach wells has become important to maximizing recovery for many oil fields. -
One approach to refracturing involves the use of mechanical diverters such as perforation balls and rock salts, which may be useful for one stage; however, cessation of pumping operations results in these diverters falling out of the perforations or dissolving.
-
An operator successfully executed two wireline through-tubing gas-shutoff (GSO) workovers in high-angle openhole-gravel-pack (OHGP) completions to isolate high-gas/oil-ratio (HGOR) zones, resulting in significantly increased oil production.
-
One of the defining features of the 21st century will undoubtedly be the changing relationship between humans and automated machines.
-
For the past quarter of a century, underbalanced drilling (UBD) has been a niche technology known to many and practiced by few. It has seen acceptance in the North Sea, where UBD is used to drill through depleted reservoirs.
-
There are headlines every day that discuss the ethics and safety behind oil and gas operations, particularly hydraulic fracturing.
-
West Africa has seen a significant shift in drilling activity, mainly in deep water. Many of the major international operators are carrying out important exploration-and-development activities there.
-
The development of conventional reservoirs has typically involved minimal logging-while-drilling (LWD) technology, usually consisting of survey, gamma ray, and possibly resistivity tools.
-
This paper describes the planning and execution of use of mud-cap fluid in the drilling of an ultranarrow-margin (0.50-lbm/gal window at the planning stage) high-pressure/high-temperature (HP/HT) well from a jackup rig.
-
A new measurement-while-drilling (MWD) tool has been designed that can operate reliably at 200°C and 207 MPa, providing real-time direction and inclination surveys, azimuthal gamma ray, annular and internal pressure while drilling, and shock and vibration measurements.
