Testing page for app

Industrial accidents rarely occur because of failures in design. More often, they occur because operators make faulty decisions while under stress or because they do not follow sensible maintenance procedures.

Two alkali/surfactant/polymer (ASP) floods became operational in the Taber area of Alberta, Canada, in 2006 and 2008.

A reservoir-monitoring system has been installed on a medium-heavy-oil onshore field in the context of redevelopment by gravity-assisted steamflood.

A successful pilot test of polymer flooding was conducted in the San Jorge Gulf basin.

This paper is a detailed examination of Pleistocene-to-Upper-Miocene turbidite reservoirs in the deepwater Gulf of Mexico under water injection.

Enhanced-oil-recovery (EOR) methods have been increasingly positioned into the mainstream of project planning these past years as conventional, highly productive, and large reservoirs have become more difficult to find.

This paper provides an overview of an engineering-design methodology that can be followed for tubular-equipment sizing and selection for use in complex wells.

This paper will demonstrate the benefit of liner-drilling technology used to drill and cement an operator’s 9⅝- and 7-in. liners in place.

Results from a well recently drilled into an underpressured reservoir in southern Mexico.

The NORSOK standard focuses on the establishment of well barriers and well-barrier elements, and how these are accepted and monitored to prevent loss of well integrity that ultimately could lead to a loss in wellbore-fluid containment.