Testing page for app

Saudi Aramco’s plan to create a global network of research centers is becoming a reality. It recently celebrated the opening of its Houston center that the company’s President and Chief Executive Officer Khalid Al-Falih described as “an upstream research center like no other.”

A well drilled and completed in a marginal field offshore India produced only gas until the oil-bearing sands were perforated and the well was put on commingled-oil-and-gas production.

The purpose of this paper is to examine coiled-tubing (CT) -stimulation and -logging technologies used in the timely project execution of one of Saudi Arabia’s largest field developments to enhance matrix-stimulation success in a cost-effective manner.

Shallow-water offshore production began before 1900 and continues to be important. Technology to maximize economic production from shallow-water fields can be adapted from onshore or deepwater technologies.

This paper discusses the use of clamp-on sonar flowmeters to minimize losses associated with well testing and to gain the subsequent benefits seen with respect to production optimization and well deliquefication.

Tar mats are encountered in many Middle East carbonate reservoirs. In cases in which tar acts as a flow barrier between water and light oil, water injectors work most efficiently when placed horizontally immediately above the tar mat to maintain pressure support during production.

The ultimate performance of fractured wells in tight reservoirs is affected severely by the interfering effects inside the fracture and interfractures.

Nine horizontal wells, including one injector well, were drilled in a marginal oil field in Bohai Bay, China. Seismic inversion indicates that sand properties and connectivity vary dramatically across the field.

Horizontal- or complex-geometry-well construction projects are potentially good candidates to work out new contractual arrangements. Authorization to proceed with these projects is technically based, and measurable key variables can be defined.

This paper discusses the laboratory evaluation of potential high-pressure/high-temperature (HP/HT) drilling-fluid designs considered for a deep gas exploration well in Malaysia.