Testing page for app
-
Accurate determination of relative permeability hysteresis is needed to predict water-alternating-gas (WAG) injection reliably. Two series of gas/water relative permeability hysteresis curves were obtained from corefloods under mixed-wet conditions. The results revealed that none of the widely used hysteresis models (e.g., Carlson and Killough models) is able to predi…
-
Drillstem testing of low-permeability reservoirs is challenging because high-pressure drawdown around the wellbore lowers fluids below saturation pressure and creates two-phase flow into the wellbore. The fluids produced at surface no longer represent the original reservoir fluid. This paper shows the benefits of a careful methodology of data selection and equation-of…
-
My, what a difference a year makes as I look back at last year’s interest vs. this year’s. Improved-oil-recovery (IOR) technology and remotely-operated-vehicle support were in the forefront last year. This year, the buzz is around high pressure/high temperature (HP/HT). This is not to say that IOR technology has vanished or become passé; far from it. But this year’s g…
-
The design of subsea equipment for pressures greater than 15,000 psi and temperatures more than 250°F is a substantial challenge. The current standard from the American Petroleum Institute (API), Specification 17D, for designing subsea equipment provides little guidance on conditions exceeding these measurements. This work has been performed to demonstrate the accepta…
-
As the need for oil and gas equipment working in hotter and higher-pressure environments continues to mount, the effort to develop an adequate set of design, material, and validation practices continues to be challenging. More-rigorous stress analysis and design methods that more closely model fast-fracture burst conditions are needed to achieve safe, reliable, and co…
-
A program was devised to test the manufacturability of shrink-fit joints made from high-strength (greater than 100 ksi) mill pipe and forged couplings.
-
Gas production in the South China Sea has seen an increasing trend of pipelines operating in high-pressure, high-temperature (HP/HT) conditions. This has led operators to look beyond the conventional stress-based design and move into strain-based design using the lateral-buckling-design approach. This paper presents both construction challenges and operational works p…
-
If there is a field where human thought is necessarily joined to action, it is health, safety, security, environment, and social responsibility (HSSE-SR). It is critical to develop the technology, the skills, and the culture needed to achieve no harm to people, no damage to the environment or the assets, and an overall benefit to society, in particular to the local pe…
-
A range of external expectations exists for companies to demonstrate how they respect human rights, including having business processes in place to prevent or mitigate human rights issues caused by the company’s projects or operations.
-
ExxonMobil has traditionally used industry standards driven by the US Occupational Safety and Health Administration (OSHA) to classify safety events on the basis of the treatment or restrictions provided. However, this treatment-based approach has limitations.