Drilling
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
This study aims to systematically assess casing integrity and corrosion risks associated with CO2 injection in oil-recovery operations.
This paper presents findings reinforcing the argument that acid fracturing is a strong alternative stimulation method to improve productivity in the Austin Chalk formation.
-
The full-field development plan for the Khazzan project in Oman is based on drilling approximately 300 wells targeting gas-producing horizons at measured depths of approximately 6000 m with 1000 m horizontal sections. -
Our industry is involved in the development of several automated tools and processes to improve the quality of drilling operations.
-
The paper demonstrates the successful application of advanced automated managed-pressure-drilling (MPD) technologies on the Dover well close to Fort McMurray, Alberta, Canada.
-
The development of the Kanowit field offshore Sarawak, Malaysia, requires the drilling of two subsea development wells with a semisubmersible rig.
-
It has been an impressive comeback for a technology that once stood on the brink of failure. The upstream oil and gas industry has largely resolved crippling technical challenges that shortened the life of fiber-optic cables in downhole applications and is now working on a big encore.
-
The list of wells drilled using dual gradient includes one drilled in the “eastern Gulf of Mexico,” which could be more precisely described as offshore Cuba.
-
The Troll field is one of the largest gas producers discovered off Norway, but ensuring its long-term future required finding ways to drill wells in an increasingly fragile formation to develop its rich oil reserves.
-
Two years ago, as drillers approached the bottom of a deepwater well in the Lula field, they were stopped again and again by total drilling fluid losses.
-
Dual-gradient drilling has long been described as the drilling method of the future for challenging offshore wells. Now, indications show it could start being used with some regularity.
-
The variables defining drill-bit performance cover a lot of ground. There is a lot of attention given to cutters studding diamond drill bits, but just as important are what is in the rest of the drillstring and the decisions made by the driller.
