Drilling
This paper aims to establish a set of best practices for generating particle-size-distribution data from core samples.
This paper discusses the successful execution of two openhole gravel-pack completions in two Gulf of Mexico fields with depleted reservoirs.
This edition highlights three offshore technology papers that address a common industry theme: how targeted engineering solutions can reduce uncertainty, shorten operations, and make technically constrained offshore well activities more executable.
-
Conventional drilling through lower intermediate intervals in the southern portion of the Alpine field on Alaska’s North Slope has posed significant challenges. -
A scientist hired by federal regulators to look for ways to reduce the risk of well blowouts said it is time for the oil and gas industry to treat kicks taken while drilling the same way doctors treat heart attacks.
-
Making hole has become a more difficult and complex operation as operators move into untapped horizons, especially deepwater and unconventional fields.
-
Tar mats are encountered in many Middle East carbonate reservoirs. In cases in which tar acts as a flow barrier between water and light oil, water injectors work most efficiently when placed horizontally immediately above the tar mat to maintain pressure support during production.
-
The ultimate performance of fractured wells in tight reservoirs is affected severely by the interfering effects inside the fracture and interfractures.
-
Horizontal- or complex-geometry-well construction projects are potentially good candidates to work out new contractual arrangements. Authorization to proceed with these projects is technically based, and measurable key variables can be defined.
-
This paper discusses the laboratory evaluation of potential high-pressure/high-temperature (HP/HT) drilling-fluid designs considered for a deep gas exploration well in Malaysia.
-
This paper discusses a rigid-setting-fluid (RSF) system that has proved successful for curing severe dynamic and static losses, pumping treatments through the drillstring bottomhole assembly (BHA) (no trip out required), because of its highly controllable fast-setting properties.
-
Mutual understanding and respect when universities collaborate with industry is crucial. A clear policy on harmonizing innovation and higher education should be created. However, caution must be taken not to have a one-size-fits-all approach.
-
This paper describes the first application of clay-free IEFs in the Norwegian continental shelf (NCS), with an emphasis on an impressively low and consistent ECD contribution.
