Drilling
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
This guest editorial addresses the need for high-temperature directional drilling technologies as the number of rigs used to develop next-generation geothermal wells is set to rise in the coming years.
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
-
One of the defining features of the 21st century will undoubtedly be the changing relationship between humans and automated machines. -
Looking after the human factors in daily operations is good business because it increases employee safety and improves work performance.
-
The development of conventional reservoirs has typically involved minimal logging-while-drilling (LWD) technology, usually consisting of survey, gamma ray, and possibly resistivity tools.
-
A new measurement-while-drilling (MWD) tool has been designed that can operate reliably at 200°C and 207 MPa, providing real-time direction and inclination surveys, azimuthal gamma ray, annular and internal pressure while drilling, and shock and vibration measurements.
-
This paper describes the planning and execution of use of mud-cap fluid in the drilling of an ultranarrow-margin (0.50-lbm/gal window at the planning stage) high-pressure/high-temperature (HP/HT) well from a jackup rig.
-
The Burgan reservoir consists of vertically stacked channel sands along with a fault network connected to the aquifer and contains highly viscous reservoir fluid.
-
The paper discusses two gas/condensate-development projects offshore Vietnam that deploy managed-pressure-drilling (MPD) technology.
-
Air drilling has become popular in the Marcellus and Utica shale reservoirs because of its higher rate of penetration (ROP) and less resulting formation damage.
-
This study concerns the mature Gyda reservoir, where some recent production wells have underperformed relative to equivalent initial wells.
-
Production and drawdown data from 10 subsea deepwater fractured wells have been modeled with an analytical model for unsteady-state flow with fines migration.
