Drilling
A report commissioned by Havtil, the Norwegian Ocean Industry Authority, calls for better dialogue regarding pore-pressure uncertainty and higher-end drilling techniques like managed pressure drilling as methods to reduce the risk of well-control events.
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
This study aims to systematically assess casing integrity and corrosion risks associated with CO2 injection in oil-recovery operations.
-
This paper offers insight into an integrated effort at combining analytical information, numerical well-test models, and geological evidence to explain the reservoir behavior observed in the Huntington field. -
For thin-oil-rim reservoirs, well placement, well type, well path, and the completion methods must be evaluated with close integration of key reservoir and production-engineering considerations.
-
This paper gives the recommended MSF horizontal-well spacing for several development scenarios in Saudi Arabian gas-reservoir environments.
-
As part of a project that involves the use of four artificial islands to drill and complete more than 300 extended-reach-drilling (ERD) wells in a giant offshore oil field, several completion designs have been piloted for brownfield development.
-
The strength and conductivity of proppant packs are key parameters for assessing their performance. This paper introduces a new analysis technique based on interpretation of acoustic measurements to quantify mechanical damage in propping agents.
-
There is no doubt that horizontal and complex-geometry wells have contributed significantly to the reliable supply of affordable energy, resulting in improvements to the quality of life of people around the globe.
-
This paper presents experimental research in which a significant fracture-pressure increase was achieved in shale and the predominant wellbore strenghtening mechanism was identified.
-
The big data approach will allow new types of data-driven models to bypass traditional bottlenecks. It is also expected to lead to different views of standard models, thus providing new and valuable insights in the process.
-
A biotechnology company from the San Francisco Bay Area is selling a futuristic solution to an old problem: lubricating drill bits grinding though rock.
-
A surface-based torque and tension sub (TTS) was used to perform measurements while drilling several extended-reach horizontal wells.
