Drilling
The firm's first-quarter rankings evaluate drilling performance across multiple measures, including total drilled measured depth.
After acquiring the block more than a decade ago, Petrobras has finally found oil in the deepwater area of the Equatorial Margin with the Morpho-1 exploration well.
More than 900 drilling and well professionals from 30+ countries gathered at APDT 2026 in Bali to explore how AI, automation, and advanced well technologies are driving safer, smarter, and more efficient drilling across Asia Pacific.
-
This paper discusses the laboratory evaluation of potential high-pressure/high-temperature (HP/HT) drilling-fluid designs considered for a deep gas exploration well in Malaysia. -
Mutual understanding and respect when universities collaborate with industry is crucial. A clear policy on harmonizing innovation and higher education should be created. However, caution must be taken not to have a one-size-fits-all approach.
-
This paper describes the first application of clay-free IEFs in the Norwegian continental shelf (NCS), with an emphasis on an impressively low and consistent ECD contribution.
-
Tar mats are encountered in many Middle East carbonate reservoirs. In cases in which tar acts as a flow barrier between water and light oil, water injectors work most efficiently when placed horizontally immediately above the tar mat to maintain pressure support during production.
-
The ultimate performance of fractured wells in tight reservoirs is affected severely by the interfering effects inside the fracture and interfractures.
-
Horizontal- or complex-geometry-well construction projects are potentially good candidates to work out new contractual arrangements. Authorization to proceed with these projects is technically based, and measurable key variables can be defined.
-
This paper discusses a rigid-setting-fluid (RSF) system that has proved successful for curing severe dynamic and static losses, pumping treatments through the drillstring bottomhole assembly (BHA) (no trip out required), because of its highly controllable fast-setting properties.
-
Making hole has become a more difficult and complex operation as operators move into untapped horizons, especially deepwater and unconventional fields.
-
Several different factors contributed to the Macondo accident, according to an analysis by the CSB.
-
The full-field development plan for the Khazzan project in Oman is based on drilling approximately 300 wells targeting gas-producing horizons at measured depths of approximately 6000 m with 1000 m horizontal sections.
