Production
A multidimensional Wiener process approach predicts casing remaining useful life, enabling safe, cost-effective well life extension and repurposing for carbon dioxide injection, CCS, and geothermal applications.
Sponsored
Unwanted water production can erode well performance and asset economics if left unmanaged. Interwell’s precision water shutoff approach, grounded in diagnostics and engineered isolation, helps operators identify water-entry points, protect hydrocarbon flow, and restore sustainable well performance in mature and complex wells.
Drone strikes, refinery shutdowns, tanker disruptions, and halted LNG production have heightened concerns about broader supply risks.
-
Just like Houston’s summer heat, corrosion of metal surfaces will occur—whether you like it or not. To help you better understand corrosion, these papers describe using water surveys in a production/injection plant, testing the effectiveness of mitigation, and data evaluation using machine learning. -
To facilitate testing and comparison of products that attenuate microbially influenced corrosion under field conditions, a method using microorganisms from a low-tide, anoxic North Sea sample was developed that allows corrosion measurements to be made for corroding biofilms grown on steel surfaces.
-
Rystad estimates almost 2 million B/D will remain shut in on average during September and October, with full restoration to pre-attack levels not coming until closer to year end.
-
At a water treatment plant for an onshore oil field in northern Germany, formaldehyde injection was started in 2015 as a biocide. The goal of this study was to understand the chemical parameters and microbial distribution in the water system and whether formaldehyde injection was effective.
-
Recent exploration success in the North Sea has motivated Total to invest some $10 billion in the basin over the next 5 years.
-
A case study in the deepwater Gulf of Mexico in which pressure transient analysis, fractional flow, and production logging tools were integrated to identify correctly the cause of, and execute an effective remedy for, a well’s productivity deterioration.
-
Despite reports to the contrary, Permian well productivity remains healthy, with average new production per well in the basin matching all-time highs, Rystad says. And the majors are now a main catalyst.
-
The first subsea multiphase boosting system was installed in 1994. Since then, it has grown into a technology with a global track record.
-
Using maglev technology, a new artificial lift system seeks to boost production output by sucking down reservoir pressure from inside the wellbore and from inside the reservoir.
-
Digital is replacing manual at Sanchez Oil & Gas. Since its implementation in 2017, the company’s Production Maintenance Tracker application has been transforming its operations management by bringing together all the assets, departments, and routes into one hub.
