Reservoir
As Egypt’s largest oil and gas investor, Eni is ramping up its 2026–2027 drilling campaign with new investments cross the Mediterranean offshore, Nile Delta, Western Desert, and offshore Sinai to strengthen the country’s role as a regional gas and LNG export hub.
The industry is no longer short of measurements; the real challenge is converting them into timely reservoir decisions that protect value. That challenge is becoming more urgent as the industry depends increasingly on mature fields and existing infrastructure. The selected papers show how this need is being addressed across different producing regions.
This paper presents a case study from a mature field redevelopment project where pulsed neutron logging was integrated with advanced reservoir modeling to improve the understanding of fluid-contact dynamics and optimize new horizontal well placement.
-
The evaluation of complex carbonate reservoirs is a challenging task, and a detailed understanding of reservoir heterogeneity is still lacking. In this study, the effect of static rock type and sample size was investigated on special-core-analysis laboratory (SCAL) data derived from capillary pressure and resistivity-index experiments at reservoir temperature and net … -
Accurate determination of relative permeability hysteresis is needed to predict water-alternating-gas (WAG) injection reliably. Two series of gas/water relative permeability hysteresis curves were obtained from corefloods under mixed-wet conditions. The results revealed that none of the widely used hysteresis models (e.g., Carlson and Killough models) is able to predi…
-
Drillstem testing of low-permeability reservoirs is challenging because high-pressure drawdown around the wellbore lowers fluids below saturation pressure and creates two-phase flow into the wellbore. The fluids produced at surface no longer represent the original reservoir fluid. This paper shows the benefits of a careful methodology of data selection and equation-of…
-
In this second article of a series covering water management in hydraulic fracturing (HF) in unconventional resources, the properties and characteristics of the flowback fluids are discussed, together with the general categories of technologies that are best suited to treat them.
-
The M4-field reservoir is approximately 2000 m below sea level in a water depth of approximately 120 m. A carbon dioxide (CO2) geological-storage study was carried out to determine the feasibility of injecting and storing CO2 in the depleted M4 carbonate gas reservoir.
-
Looking back through previous editions of this article, I note that, in 2011, I wrote, “there’s a growing tendency in some quarters to use very simple models.” That may be true, but there is also a growing tendency among vendors to offer models with more and more features.
-
Large volumes of gas can be produced at high rates with conventional horizontal- or vertical-well configurations for long periods of time from some methane-hydrate accumulations by means of depressurization-induced dissociation.
-
Initializing a reservoir simulator requires populating a 3D dynamic-grid-cell model with subsurface data and fit-for-purpose interrelational algorithms. In practice, these prerequisites rarely are satisfied fully.
-
Recent industry activities have turned their focus to the areas of liquid-rich shale (LRS) and light tight oil (LTO) along with unconventional tight and shale gas.
-
Unconventional gas is poised to enter its Golden Age and to effect positive global change if it can meet three challenges. Consider the 7 billion people on Earth who use energy each day.
