Testing page for app

While inherent design changes and innovations made to BHAs and bits can be applied to both vertical and horizontal wellbores, the industry is targeting horizontal applications.

The sizing procedure described in the paper allows one to size horizontal gas/liquid separators considering nonstable flow rate at the inlet or fluctuations in the liquid fraction on the same stream.

The paper presents and discusses a solution for immersive training of industrial operators that allows experiencing the multifaceted scenarios of real-plant operations.

This paper gives an overview of ongoing research activities on the subject of offshore use of composite flowlines, risers, and topside piping.

A 100% fully mechanical rotary-steerable tool has been developed specifically for the high-volume drilling market, providing full 3D directional control while under full rotation of the drillstring from surface.

This paper describes functional water-treatment steps that target the most common removal of suspended solids and oil or condensate from Produced-water (PW) and flowback-water (FW) for recycling or disposal operations.

The Piceance basin in western Colorado is a long-term play expected to produce for another 20 years or more.

The demands for fresh water used in hydraulic-fracturing operations are placing constraints on water resources in some regions of the United States. Along with higher acquisition costs for fresh water, produced-water-disposal costs also have increased.

The recent introduction of a new rolling-cutter polycrystalline-diamond-compact (PDC) bit that uses 360° of the diamond edge has delivered positive results in field trials.

Conventional drilling through lower intermediate intervals in the southern portion of the Alpine field on Alaska’s North Slope has posed significant challenges.