Reservoir characterization

Getting a Feel for the Rock

The force required to drill through a rock is a direct test of its strength and stiffness. Developing a reliable measure of the properties of rock based on the force required to drill a long lateral is a large challenge.

jpt-2016-05-fig2unconv.jpg
Based on data gathered while drilling, Drill2Frac creates a wellbore map showing variations in hardness along a wellbore.
Image courtesy of Drill2Frac.

The force required to drill through a rock is a direct test of its strength and stiffness. Anyone who has ever used a power drill to drill through plaster and then hit a wooden beam can feel the difference.

Turning those feelings into a reliable measure of the properties of rock based on the force required to drill a long lateral is a large challenge.

Two startups, Drill2Frac and Fracture ID, are selling services that do that, though their methods vary based on the sources of the inputs and the outputs offered to customers. Both are offering an option that can become a routinely used diagnostic method by those designing fractures by providing information comparable to that from a sonic log, but at a significantly lower price.

Rock property information was also often a missing piece for those doing microseismic testing, which images the impact of fracturing based on the sound produced during certain types of fracturing. Users wanted better rock property information to improve the interpretation of the changes in microseismic data gathered around a well, said Chris Neale, president of Fracture ID, which uses downhole drilling data for imaging.

“When I was deep in the microseismic world I was very frustrated.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.