Monthly Features
-
Oil prices are high, but spending has not caught up—yet. Meanwhile, exploration strategies are changing around the world toward a lower-risk model, and the frenzied pace of US M&A has very much cooled off. -
This case study outlines a full-scale testing program focused on the behavior of thermal casing connections subjected to severe bending and low-cycle fatigue loading. -
With millions of wells having been drilled in the US since the beginning of the oil age, the land is pocked with old, unused wellbores. For most, repurposing is a pipe dream. Plugging is the best option. -
Disposal wells remain the lowest-cost solution for produced water, but concerns over seismicity and long-term sustainability are accelerating interest in alternatives. -
This case study from Malaysia’s Petronas outlines a comprehensive review of perforation-charge testing across various tubular and reservoir conditions to help improve production from complex downhole scenarios. -
As managed pressure drilling gains traction, its principles are influencing a wider range of well-construction activities.
-
The room for error and cost overruns just got a lot smaller with the escalating need to make operations more efficient and leaner with fewer resources and investors continuing to prioritize ESG alongside profitability. -
As tight-oil producers move to curtail production, hard-to-answer questions are being raised about how shuttered wells will come back. The issue reveals key uncertainties about the delicate flow paths that define unconventional reservoirs.
-
Following the Deepwater Horizon incident in the Gulf of Mexico, the industry put in place comprehensive initiatives to improve offshore safety. This article outlines the status of two initiatives, a summary of the current focus areas to enhance safety, and SPE’s contribution to them.
-
Reductions will begin next month and last until June. After that, major oil producers around the world plan to step down from the cuts in phases that extend to 2022.
-
Measuring the flow of water, mud, and cuttings from a well is critical, and difficult. A new flowmeter design that promises to be both accurate and durable is one of three technologies featured in a JPT series on drilling measurement innovation.
-
The best way to know how drilling affects drill bits is to visualize the bits. A device that creates high-resolution images for precise measurements is one of three technologies being featured in a JPT series on drilling measurement innovations.
-
Kamel Ben-Naceur is the nominee for 2022 SPE President. He and seven others make up the new slate of nominees recommended for positions open on the SPE Board of Directors.
-
Edge—or, in-field, device-level—computing is being driven by the need for data from individual wells to be analyzed and processed at the wellsite instead of in data centers for early and accurate decision making.
-
For the upstream industry, where improvement in efficiency or production can drive significant financial results, there is no question that the size of the digital prize is huge. So are the challenges.
-
A downhole compressor solution based on advanced magnetic technologies completed its first field trials in an unconventional gas well. It resulted in a 62% increase in gas production and significant increase in liquid production compared to using a rod pump previously in the well
Explore Content by Discipline
Stay Ahead With JPT Newsletters
JPT Newsletter (Weekly).
Essential global industry news, technology developments, and market trends delivered to your inbox.
JPT Unconventional Insights (Monthly).
Global perspectives and expert analysis on shale, tight oil, and emerging unconventional plays.
Get JPT articles in your LinkedIn feed and stay current with oil and gas news and technology.