Search results for:

On the basis of safety performance results achieved through automation downstream, an operator set out to achieve the same advances in its upstream business.

This paper reviews the design and implementation of a full-field interwell tracer program for a giant onshore oil field in Abu Dhabi.

Partitioning interwell tracer tests (PITTs) have been used to estimate remaining oil saturations (ROSs) during waterflooding.

This paper presents a new approach in monitoring the hydraulic system and in the recognition of well‑control events at an early stage such that proper counteractions can be initiated before any damage occurs.

The development of the Kanowit field offshore Sarawak, Malaysia, requires the drilling of two subsea development wells with a semisubmersible rig.

Ferrous sulfide (FeS) precipitation increases during shale-gas and -oil production because of increased biologically and thermally induced sulfide production. Although FeS scale is abundant, little is understood about its precipitation and inhibition properties.

In this study, the authors demonstrate a reliable, cost-effective methodology that empowers shale operators with reservoir data on every well.

The gas-producing carbonate zones of the Ghawar field in eastern Saudi Arabia have been affected by extensive iron sulfide (FeS) scale deposition, reducing overall gas production and increasing risks during well interventions.

This paper documents the success story of the first quadlateral completion for an Alaskan operator by use of stacked, rotatable, Technical Advancement for Multilaterals Level-3 junction systems.

This paper describes various sulfide inhibitor-testing techniques that have been applied to candidate products for the management of zinc sulfide (ZnS) and lead sulfide (PbS) in a gas/condensate field with a known relatively severe ZnS/PbS scaling problem.