Fracturing/pressure pumping
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
This case study presents a procedure in which the operator compared production from wells with adjusted wettability to a control group, finding that the adjustments resulted in significant improvements in production and reductions in produced water.
This paper presents findings reinforcing the argument that acid fracturing is a strong alternative stimulation method to improve productivity in the Austin Chalk formation.
-
Prompted by concerns about possible leaching from phenolic novolac resin-coated proppants (RCPs) during operations, Fairmount Santrol conducted analysis that showed no leaching of free formaldehyde or free phenol from its phenolic novolac RCPs. -
A small group of engineers are turning a geeky focus on how to better control the flow of fluids through the holes shot in the casing to increase the number of spots stimulated, and ultimately production.
-
As producers and third-party vendors navigate the logistical challenges of water management, the push toward greater reuse of produced water has gained steam. How close is the industry to 100% reuse?
-
CARBO introduced CARBOAIR, a proppant technology designed to increase production and estimated ultimate recovery from slickwater fracturing operations.
-
Oklahoma is tightening its rules for hydraulic fracturing after studying a new cluster of earthquakes in one of the hottest US regions for drilling.
-
During a panel discussion on what fractures look like, one expert added a significant qualifier to the title: what they “may look like.”
-
This paper describes numerical-simulation results from a three-well pad in a stacked liquids-rich reservoir (containing gas condensates) to understand the interaction between wells and production behavior.
-
The Kaji Semoga Field in South Sumatra consists of three main reservoirs—Telisa sandstone (TLS), Baturaja limestone, and Talangakar sandstone. The successful development of TLS with hydraulic fracturing led to further efforts to maximize oil recovery.
-
Significant improvements to completions design and manufacturing have been made recently to accommodate long laterals and multiple fracturing or acidizing stages for different reservoir types, lithologies, and conditions.
-
This paper summarizes key engineering discoveries and technical findings observed during the execution of 200 hydraulic-fracturing diagnostic injection tests in the Raageshwari Deep Gas (RDG) Field in the southern Barmer Basin of India.
