Production
The supermajor said the fields are not expected to contribute meaningfully to its production profile by 2030.
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
This case study describes how edge computing and industrial internet of things platforms were deployed to automate and optimize production operations across four distinct basins.
-
The highlight of this year’s feature on mature fields and well revitalization has been the increasing use of artificial intelligence (AI) and machine learning (ML) for analysis of mature assets. Many paper proposals studied using AI/ML techniques cover a wide range of topics including optimization of production operations, faster reservoir characterization of mature f… -
SponsoredEach well drilled, stimulated, and completed represents a significant investment in time, resources, and expenses. From artificial lift system design to maintenance scheduling, maximize your investment by ensuring optimal flow and production throughout the life cycle.
-
Gas-capturing targets were met for most of the year as routine flaring drops to just 7.5% statewide and even lower in the Bakken Shale.
-
The chief of the world's largest oil company issued a reality check on how the energy transition is doing and called for a more practical strategy going forward.
-
An experimental study of a shroud-type downhole separator for a pumped horizontal or deviated well is presented in this study.
-
After 9 years of contributing to JPT, it’s time to hang up my spurs. I wanted to use this opportunity to raise a couple of issues, namely the effect and utility of machine learning and the usage of point-and-click engineering software.
-
This paper is the second of a two-part series. It covers facilities problems caused by iron, injectivity problems caused by iron, and the mitigation of colloidal iron-related problems.
-
SponsoredGot carbonates? Then you know the challenges of acidizing. A new autonomous outflow control device can give you greater control and significantly improve your results.
-
The difficulty in selling a chemical to aid subsea pipeline flow has been delivering it to the wells.
-
Mixing dry polymer powder and water to make friction reducer as needed during fracturing can cut the cost of the additive and the testing of whether a drastically simplified recipe performs as well as more-complex mixes.
