Testing page for app

This paper presents methods for production forecasting that give reasonable post-treatment predictions that have been found to be useful for economic planning.

The paper presents and discusses a solution for immersive training of industrial operators that allows experiencing the multifaceted scenarios of real-plant operations.

This paper gives an overview of ongoing research activities on the subject of offshore use of composite flowlines, risers, and topside piping.

Two points stand out in the development and status of technology for production and facilities. The first is the amount of innovative ongoing work related to piping, pipelines, and materials for severe service. The second is the amount of work involving the use of digital simulations.

While inherent design changes and innovations made to BHAs and bits can be applied to both vertical and horizontal wellbores, the industry is targeting horizontal applications.

The sizing procedure described in the paper allows one to size horizontal gas/liquid separators considering nonstable flow rate at the inlet or fluctuations in the liquid fraction on the same stream.

A 100% fully mechanical rotary-steerable tool has been developed specifically for the high-volume drilling market, providing full 3D directional control while under full rotation of the drillstring from surface.

This paper describes functional water-treatment steps that target the most common removal of suspended solids and oil or condensate from Produced-water (PW) and flowback-water (FW) for recycling or disposal operations.

The Piceance basin in western Colorado is a long-term play expected to produce for another 20 years or more.

The demands for fresh water used in hydraulic-fracturing operations are placing constraints on water resources in some regions of the United States. Along with higher acquisition costs for fresh water, produced-water-disposal costs also have increased.