Drilling
This paper presents the application of degradable particulate-diverter technology to improve oil production by effectively diverting stimulation treatment fluids away from high-water-cut, high-permeability, high-temperature producing intervals or zones.
This paper presents the methodology for developing drill-in organophilic clay-free invert-emulsion-fluid technology that enhances well production through fundamental geological studies and fluid testing.
This paper presents the large-scale deployment and operational integration of an advanced, automated rheometer in the Ghawar gas field, one of the world’s most prolific and technically complex hydrocarbon developments.
-
Dual-gradient drilling has long been described as the drilling method of the future for challenging offshore wells. Now, indications show it could start being used with some regularity. -
The variables defining drill-bit performance cover a lot of ground. There is a lot of attention given to cutters studding diamond drill bits, but just as important are what is in the rest of the drillstring and the decisions made by the driller.
-
A previous attempt to drill an exploration well in ultradeep water in the Gulf of Mexico (GOM) did not reach its objective.
-
This paper describes the design, testing, installation, and performance of the first fully completed well using an intelligent inner completion inside an uncemented liner with openhole packers for zonal isolation.
-
This paper describes placement of horizontal wells in this kind of heterogeneous reservoir through an integrated approach.
-
The oil industry has always been innovative, even under adverse and challenging conditions imposed by the nature of upstream projects.
-
This paper presents a case history of a North Sea well in which managed-pressure drilling (MPD) was used as the enabling technology to drill, case, and cement the well.
-
This paper discusses the factors to be taken into account when designing cement jobs using fluids in turbulent flow and some of the overlooked benefits of using turbulent-flow design for mud removal.
-
This paper describes the first application of the 10¾-in. CV in a deep-well sour environment.
-
The most common method used for the placement of cement plugs is the balanced-plug method using drillpipe, tubing, or a combination of both.
