Drilling
This paper presents a study that confirms glass-reinforced-epoxy-lined tubing as a reliable, cost-effective solution for long-term water-injection service in moderate-salinity offshore environments.
This paper aims to assess the effectiveness of using advanced integrated production-data-analysis techniques for condensate-rich tight gas fields.
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
-
This paper describes the evaluation of a nanofluid containing nanomaterials with high adsorption capacity used for asphaltene inhibition in the volatile Cupiagua Sur oil field in Colombia. -
Historically, invert-emulsion drilling fluids are the preferred system for drilling offshore Cameroon. However, with a regulatory environment moving toward zero discharge, associated costs are rising.
-
Determining the fluid properties of a reservoir by using pressure/volume/temperature (PVT) analysis is essential to petroleum reservoir studies, production equipment design, and reservoir recovery efficiency estimation.
-
Deepwater cementing becomes increasingly challenging as drilling operations move to greater water depths and more-remote locations.
-
ADMA-OPCO had integrity problems in one of its gas wells, and abandonment was the only option available to restore the integrity of the offshore multiwell jacket and revive adjacent wells.
-
This paper outlines two lesser-known types of torsional dynamics observed while drilling interbedded carbonate formations in the Middle East with the latest generation in point-the-bit rotary-steerable systems (RSSs).
-
The Nini East field represents a significant drilling challenge.
-
This paper discusses the design, manufacture, and application of a contiguous blade of polycrystalline diamond (PCD).
-
This year has been a great year for me; I was able to play more rounds of golf than expected! I was also successful in sealing a few research collaboration agreements within the oil and gas industry.
-
When oil-based mud is used, the drilled formation solids (cuttings) are regarded as controlled or hazardous waste.
