Production
The supermajor said the fields are not expected to contribute meaningfully to its production profile by 2030.
This case study describes how edge computing and industrial internet of things platforms were deployed to automate and optimize production operations across four distinct basins.
Output is rising fast in the South American shale play and putting Argentina on a course to soon reach 1 million B/D.
-
Oil and gas producers in the state are being asked to submit data and economic analysis on why they cannot sell natural gas before they are granted permission to flare it. -
SponsoredWith an intense focus on improving returns and cash flow, oil and gas producers need step-change improvement in managing production versus plan. Embracing AI is critical to overcoming today's tools that largely fall short of achieving that ultimate goal.
-
With the acquisition of Schlumberger’s rod lift business, Lufkin gains several products, brands, and key proprietary software.
-
To have the flexibility to treat both rich and lean gas wells [up to 100% gas volume fraction (GVF)], a new multiphase pump system has been developed by comparing the different boosting systems performance and analyzing well-by-well production scenarios.
-
To further reduce backpressure on low-pressure gas wells and increase reserves in a mature gas field, a gas-ejector project was evaluated and proposed.
-
Wellbore tortuosity is a term that has steadily increased in relevance to the oil and gas industry over the past decade, but its importance is especially clear in the current environment.
-
Present industry solutions to the challenge of well spacing involve expensive geomechanical Earth modeling or fracture-geometry monitoring that is time-consuming, data-intensive, and geography-specific.
-
Primarily used in a few US states, waste-slurry-injection technology could help operators reduce cost, while also potentially reducing their carbon footprint. But the process may still present technical and environmental challenges.
-
The complete paper describes the hurdles that have prevented single-trip installation of upper and lower completions in the complex world of subsea and deepwater applications and examines the processes, technologies, and risk-mitigation steps that took a concept from pilot to successful deployment.
-
The complete paper reviews the results of gas hydrate engineering and production testing studies associated with northern Canada and Alaska.
