Trending Content on OGF
Canadian Natural Resources has awarded Torus BGP a contract covering a trio of offshore assets.
For the fourth consecutive year, driver shortage remains the trucking industry’s leading concern. Oil and gas and energy industries face major challenges in the retention and recruitment of drivers for their transportation fleets, especially for petroleum and liquid tankers.
Software company FutureOn and consulting firm Wood are working together on an enhanced digital service for asset operators.
Global Hydraulic Fracturing Evolution at the Forefront of the SPE International Hydraulic Fracturing Technology Conference and ExhibitionThe second edition of the SPE International Hydraulic Fracturing Technology Conference and Exhibition opened in Muscat, Oman, yesterday with more than 395 oil and gas professionals from 90 companies and 28 countries.
Gas processor Lucid Energy is moving forward with a plan to inject a mix of carbon dioxide and hydrogen sulfide deep below New Mexico’s portion of the Permian Basin. The project is designed to keep injecting for 30 years.
Even though total produced volumes are projected to hit new record highs in the coming years, treated water is expected to be comparatively lower than in the past, despite water disposal practices increasing oilfield seismic activity, with earthquakes nearly doubling in West Texas alone in 2021.
Being first isn’t easy, as the massive Prelude has demonstrated. Since being commissioned in 2018, the world’s largest vessel has suffered a series of setbacks and has now halted production for an indefinite period of time.
The mood in the global oil and gas business is looking up, but the times are changing as reflected in this selection of some of the most-read JPT articles of the year.
Project and Market Trends
Much has been written on the upcoming supply crunch in the investor-friendly offshore wind installation market, but what are the challenges facing contractors looking to capitalize on this growth and optimize any potential investment in new assets?
As a global pandemic continues, the London-based company's annual lookback has found that last year's pain was not shared evenly across the energy spectrum.
New sibling facility to Calcasieu Pass will boast nameplate liquefication capacity of 20 mtpa of LNG.
Decommissioning decision makers often need to determine the best and most practicable options for pipelines, flowlines, and power cables, including leave-in-place strategies or removal. This study presents results from several evaluations using advanced methods to support the determination of options.
The Savvy Separator: Oil/Water Separation and Gas Processing Facilities—Impact of Process Flow Conditions on Level Measurements
This 17th article in the Savvy Separator Series addresses how process flow conditions can lead to incorrect or misinterpreted level readings. Poor process vessel design is often exacerbated by miscalibrated instrumentation, leading to suboptimal operation and poor efficiency of the separator. In some cases, the location of the instrumentation can also lead to erroneou…
For as long as anyone can remember, the liquid carry-over separation efficiency of 0.1 gal/MMscf has been ubiquitously specified in separator design. This article provides the most likely scenario of its evolution.
Process design of separation internals is just one step in improving the vessel performance. Just as important are the support design and installation steps. These lessons learned help to guide good off- and on-site planning to minimize separator turnaround.
Troubleshooting and solving separation problems takes a combination of analytical tools, experience, and a knack for investigation. These 5 lessons provide a starting point for assessment.
Oversizing a separator ensures meeting the life cycle needs of a facility, but are we setting ourselves up for failure in the long run? With peak rates typically being short-lived at best, or at worse, well beyond actual production rates, more weight needs to be given to the tail-end of production.
This article highlights some of the code and registration issues the Savvy Separator engineer encounters when retrofitting a vessel with internals to improve or restore the process performance of the separator.
By understanding the factors involved in oil droplet coalescence, the Savvy Separator engineer can assess the operational/chemical factors in the treatment system that are affecting droplet growth and make adjustments to enhance coalescence rates.
In this tenth article of the series, the author focuses primarily on specific operational elements of troubleshooting rather than the mechanical design of the separator.