JPT October 2020 Issue
On the Cover
A concrete block that was used as a control during an experiment with thermochemical fluids, which are being developed to reduce the amount of surface pressure required to hydraulically fracture tight reservoirs. Source: Saudi Aramco EXPEC Advanced Research Center.
Guest Editorial
President's Column
Most of you reading this are thinking, okay, he’s SPE President, he must know something I don’t know, see something I don’t see, etc. The truth is we are all in the same storm of pandemic+economic crisis=chaos.
Monthly Features
-
When a plug gets stuck in a well, consider the cause. Often stuck fracturing tools are a warning sign of casing trouble. Companies that have investigated plug problems have been surprised by the findings.
-
Bringing the Heat: Aramco Field Tests High-Temperature Chemistry To Slash Tight-Gas Completion CostsSaudi Aramco and university researchers are experimenting with a thermochemical fracturing fluid that aims to eliminate more than half of the pumping horsepower typically required to complete horizontal wells.
-
Though shelved by low oil prices, the plan to execute the largest enhanced oil recovery program of its kind offers insights into what it may take for the shale sector to escape pilot mode and scale up gas huff ’n’ puff operations.
-
Extending and transferring the high-temperature capabilities of existing E&P technologies could make geothermal energy development possible—and scalable—anywhere in the world.
-
This article addresses a means to improve hydraulic fracturing operations by measuring the perforation effectiveness on a stage-by-stage basis before the hydraulic fracturing process begins.
Technology Focus