Trending Content on OGF
Tellurian awarded a contract that will result in the first application of the service provider's integrated compressor line technology in North America.
A study of a limited number of decommissioned oil and gas wells in England found no evidence of methane leaks, including four wells found to be leaking in an earlier study.
The Mammoth project follows the company’s proven Orca model but will scale up the CO2 capture capacity to 36,000 tons per year.
ADNOC aims to shift $19 billion in procurement contracts to local manufacturers to grow the UAE economy and attract new investment.
Terry Palisch is the nominee for 2024 SPE President. He and five others make up the new slate of nominees recommended for positions open on the SPE International Board of Directors.
The acquisition expands Targa’s midstream natural gas processing footprint in the active Delaware Basin of New Mexico.
The market for maintenance, modification, and operations in the renewable and low-carbon energy sector is expected to approach $250 billion by 2030, closing in on that for the oil and gas industry, according to research by Rystad Energy.
In a new report from DNV, global hydrogen production is projected to increase by an order of magnitude from 2030 to 2050. But it will still not be enough to satisfy net-zero targets.
Project and Market Trends
Much has been written on the upcoming supply crunch in the investor-friendly offshore wind installation market, but what are the challenges facing contractors looking to capitalize on this growth and optimize any potential investment in new assets?
As a global pandemic continues, the London-based company's annual lookback has found that last year's pain was not shared evenly across the energy spectrum.
The LNG provider has firmed up financing that will allow it to proceed with construction of the third stage of the Texas coast liquefaction project.
Eni and ConocoPhillips will join TotalEnergies as international partners with QatarEnergy on the North Field East Expansion, the world’s single largest LNG project ever.
QatarEnergy has tapped TotalEnergies as its first international joint venture partner for the North Field East expansion—the world’s largest LNG project ever.
The Savvy Separator: Oil/Water Separation and Gas Processing Facilities—Impact of Process Flow Conditions on Level Measurements
This 17th article in the Savvy Separator Series addresses how process flow conditions can lead to incorrect or misinterpreted level readings. Poor process vessel design is often exacerbated by miscalibrated instrumentation, leading to suboptimal operation and poor efficiency of the separator. In some cases, the location of the instrumentation can also lead to erroneou…
For as long as anyone can remember, the liquid carry-over separation efficiency of 0.1 gal/MMscf has been ubiquitously specified in separator design. This article provides the most likely scenario of its evolution.
Process design of separation internals is just one step in improving the vessel performance. Just as important are the support design and installation steps. These lessons learned help to guide good off- and on-site planning to minimize separator turnaround.
Troubleshooting and solving separation problems takes a combination of analytical tools, experience, and a knack for investigation. These 5 lessons provide a starting point for assessment.
Oversizing a separator ensures meeting the life cycle needs of a facility, but are we setting ourselves up for failure in the long run? With peak rates typically being short-lived at best, or at worse, well beyond actual production rates, more weight needs to be given to the tail-end of production.
This article highlights some of the code and registration issues the Savvy Separator engineer encounters when retrofitting a vessel with internals to improve or restore the process performance of the separator.
By understanding the factors involved in oil droplet coalescence, the Savvy Separator engineer can assess the operational/chemical factors in the treatment system that are affecting droplet growth and make adjustments to enhance coalescence rates.
In this tenth article of the series, the author focuses primarily on specific operational elements of troubleshooting rather than the mechanical design of the separator.